Specification Process

To ensure the timber veneer component of your fitout meets your expectations, we recommend you take the following steps   :

1. Contact Fethers for a polished sample of your desired finishes. These samples will include log numbers to allow us to identify the logs sampled at a latter date. 

2. Please provide Fethers with information on the project. 

3. Specify the product with full details including :

1 - Veneer Species and log number as per samples supplied.

2 -Type of Cut - Crown Cut, Quarter Cut etc

3 - Veneer available from Fethers Veneer - Ph 03 96465266

4 - Matching Type - Book Match, Slip Match, Radom mis-match etc

5 - Order of sequence matching required is indicated on drawing.

6 - Direction of grain is indicated on drawing.

7 - Substrate : MDF, Particleboard, Plywood etc

8- Polish type, gloss level, UV inhibitors and level of grain fill.

9 - Contractor to supply indicative finished sample of veneer prior to project commencement. 

In addition to all of the above, we always encourage everyone to take the time to visit us in Port Melbourne to view and select the specific veneer for their project if possible.